Sexy Vampirella And Ladydeath 3d Printed Model Unassembled Unpainted
Info: Model comes unassembled and unpainted, printed with a high resolution resin printer. Depending on the level of detail, some parts (most of the time the base) will be printed with PLA material. Parts will be hollowed to reduce risks of failure and ensure that all fine details are printed. Handled With Care: As most modelers would know, many people don't clean out the uncured resin from inside hollowed parts, which then leads to cracking and your models exploding later in time. I take precautions to prevent this from happening to your models by cleaning the hollowed pieces with 99% isopropyl alcohol from any uncured resin which will ensure that your kits are built to last! All resin parts will be cured with UV light and will be safe to handle. Assembly: Putting the pieces together should be quite easy to figure out, so no instructions/guide will be included, but I will be able to help you if you do get stuck on something, just let me know! Superglue will be recommended to jointing the pieces together, if you encounter any gaps/seams when jointing the pieces, its quite common and unpreventable in 3d printing, be prepared to fill the seams with your preferred filler if desired. This model will be about 300mm (11.8 inch) tall, 417mm (16.4 inch) long, and 358mm (14 inch) wide. These models are not officially licensed by their original creators, they are made by different designers as FAN ART.